BESSv& STORAGE LEAD POSITION

Bureau Veritas · Eritrea

Apply on the company website

About Us

Your career is about more than building a resume - it is a chance to #LeaveYourMark. Guaranteeing quality, ensuring health and safety, mitigating risks and improving performance, as well as environmental protection and social responsibility: this is what Bureau Veritas is about. Join an inclusive, flexible and diverse company where you can thrive while positively contributing to transforming the world in which we live.

Position Summary

The BESS / Storage Lead will lead the detailed design and technical definition of the project’s battery energy storage systems. The Expert will be responsible for BESS sizing, operating strategy, battery and power-conversion architecture, BMS/EMS interfaces, thermal management, fire and life-safety systems, warranties, degradation and augmentation planning, capacity and efficiency testing, commissioning and O&M readiness. The role will also provide technical guidance to equipment suppliers and installation contractors throughout design, manufacture, installation, testing and handover.

Key Responsibilities

• Lead detailed BESS engineering, design coordination and technical assurance from design development through procurement, installation, commissioning and operational handover.
• Determine required BESS power and energy ratings based on project use cases, duty cycles, grid requirements, operating strategy, reserve requirements and lifecycle performance targets.
• Develop BESS sizing models considering usable state-of-charge range, depth of discharge, round-trip efficiency, auxiliary consumption, temperature, degradation, availability and end-of-life capacity.
• Define the operating strategy for charging, discharging, peak management, renewable-energy firming, ramp-rate control, frequency support, reserve provision, islanded operation and other applicable services.
• Prepare and review the BESS system architecture, including battery racks, containers or enclosures, power conversion systems, transformers, switchgear, auxiliary systems, controls and collection-system interfaces.
• Define battery-cell and module technical requirements, including LFP or comparable lithium-ion chemistry, performance characteristics, safety certifications, quality controls and traceability.
• Develop technical requirements for the Battery Management System, Energy Management System, power-plant controller, SCADA, protection, metering and remote-monitoring interfaces.
• Define control hierarchies, command priorities, operating modes, state-of-charge management, alarm handling, event recording, cybersecurity and data-access requirements.
• Coordinate interoperability among BMS, EMS, PCS, SCADA, plant controllers, protection systems, meters and the utility or system-operator interface.
• Define thermal-management requirements, including cooling capacity, redundancy, ventilation, temperature uniformity, environmental limits and performance monitoring.
• Develop fire and life-safety requirements covering prevention, detection, gas monitoring, ventilation, suppression, propagation control, emergency isolation, access, signage and first-responder arrangements.
• Coordinate BESS safety design with the Occupational Health & Safety Specialist, civil engineers, electrical engineers, emergency services and relevant authorities.
• Assess site layout, container spacing, access, drainage, flood risk, ventilation, blast or deflagration considerations, security and emergency-response provisions.
• Prepare detailed design criteria, calculations, single-line diagrams, layouts, equipment schedules, technical specifications, bills of quantities and interface-control documents.
• Define performance guarantees for power, usable energy, round-trip efficiency, response time, availability, auxiliary load, degradation, capacity retention and other required parameters.
• Review supplier warranty structures, throughput limitations, cycle limits, operating envelopes, exclusions, augmentation obligations, availability guarantees and long-term service agreements.
• Develop degradation and augmentation strategies to maintain required usable capacity throughout the project life and warranty period.
• Review supplier and contractor designs, calculations, simulations, datasheets, drawings, software descriptions, safety studies, quality plans and method statements.
• Provide technical clarification and guidance to BESS suppliers, PCS suppliers, integrators, installation contractors and commissioning teams.
• Support procurement through preparation of technical requirements, responses to clarifications, bid evaluation, technical negotiations and review of supplier guarantees.
• Develop and review factory acceptance test requirements for battery systems, PCS, BMS, EMS, transformers, switchgear, monitoring systems and integrated controls.
• Witness or support FAT activities, including functional tests, communications tests, protection checks, control-mode verification, safety-system tests and documentation review.
• Develop and review site acceptance, pre-commissioning, commissioning and performance-test procedures, including clear test boundaries, instrumentation and acceptance criteria.
• Witness installation inspections, insulation and continuity tests, protection tests, communications tests, functional tests, charge-discharge tests and emergency-system demonstrations.
• Lead or support verification of rated power, usable capacity, round-trip efficiency, response time, state-of-charge accuracy, availability and thermal performance.
• Investigate equipment or system underperformance, alarms, communication failures, thermal issues, capacity shortfalls and control-interface problems, and recommend corrective measures.
• Ensure O&M readiness through review of staffing, training, spares, special tools, software licences, maintenance plans, emergency procedures, warranties and technical support arrangements.
• Review as-built drawings, configuration files, model files, test records, commissioning dossiers, warranties, asset registers, manuals and handover documentation.
• Prepare design reports, technical memoranda, design-review comments, inspection reports, test reports and commissioning or acceptance recommendations.
• Provide training and knowledge transfer to Client, utility and operations personnel on BESS operation, performance monitoring, safety, maintenance and warranty management.

Qualifications and Experience

• Bachelor's degree in Electrical Engineering, Power Engineering, Energy Engineering or a related discipline; a Master's degree in a relevant engineering field is preferred.
• Minimum of 8 years of professional experience in battery energy storage engineering, integration, design, supervision or commissioning.
• At least 5 years of relevant experience on utility-scale or grid-connected BESS projects.
• Demonstrated experience on at least two BESS projects, including at least one system rated 10 MW / 20 MWh or larger.
• Demonstrated experience with LFP or comparable lithium-ion technology, BMS/EMS integration, warranties, degradation, thermal management, fire safety, performance testing and O&M.
• Strong experience in BESS sizing, duty-cycle assessment, operating strategy, state-of-charge management, degradation modelling and augmentation planning.
• Experience preparing or reviewing technical specifications, calculations, layouts, single-line diagrams, equipment schedules, bills of quantities and interface documents.
• Practical experience supporting procurement, supplier review, FAT, SAT, installation, commissioning, performance verification and troubleshooting.
• Experience coordinating BESS interfaces with solar PV, generators, grids, substations, SCADA/EMS, protection, metering and communication systems.
• Experience in East Africa, Sub-Saharan Africa, high-temperature environments, weak-grid systems, remote sites or internationally financed energy projects is an advantage.

Technical Competencies

• Utility-scale BESS sizing, duty-cycle definition, use-case assessment and lifecycle energy modelling.
• LFP and comparable lithium-ion battery technologies, cell and module characteristics, racks, enclosures and containerised systems.
• Battery Management Systems, Energy Management Systems, power-plant controllers, SCADA and remote-monitoring integration.
• Power conversion systems, transformers, switchgear, protection, auxiliary systems and electrical collection interfaces.
• State-of-charge and state-of-health management, degradation, throughput limits, augmentation and end-of-life capacity planning.
• Thermal management, ventilation, cooling redundancy, temperature monitoring and environmental operating limits.
• BESS fire and life safety, including detection, gas monitoring, suppression, propagation control, emergency isolation and response planning.
• Warranty analysis, performance guarantees, availability, capacity retention, efficiency, response time and long-term service requirements.
• FAT, SAT, integrated functional testing, charge-discharge testing, capacity testing, efficiency testing and commissioning.
• O&M readiness, preventive maintenance, spares, tools, software, training, emergency procedures and warranty administration.
• Working knowledge of applicable IEC, IEEE, NFPA, UL or equivalent BESS standards and good international engineering practice.
• Strong technical reporting, supplier management, multidisciplinary coordination, troubleshooting and knowledge-transfer capability.

Professional Credentials and Attributes

Professional Engineer, Chartered Engineer or equivalent registration is preferred where applicable. Relevant certification or membership in a recognised energy-storage, electrical or power-engineering institution is desirable. The successful candidate will demonstrate advanced systems thinking, sound engineering judgement, strong technical leadership, attention to safety and detail, supplier-management capability and the ability to resolve complex battery, control, thermal, performance and interface issues.

ACCEPTABLE CV FORMAT

CURRICULUM VITAE (CV)

Education: {List college/university or other specialised education, giving names of educational institutions, dates attended and degree(s)/diploma(s) obtained.}

Employment record relevant to the assignment: {Starting with the present position, list relevant employment in reverse chronological order. Provide dates, employing organisation, position held, activities performed, assignment location, BESS capacity and contact information for references.}

Membership in Professional Associations and Publications: _________________________________________________________________

Language Skills (indicate only languages in which you can work): _________________________________________________________________

Adequacy for the Assignment:

Contact information: (email ____________________, phone ____________________)

Name ____________________     Signature ____________________     Date ____/____/________

More jobs at Bureau Veritas · Other jobs in Eritrea