QC Inspector - Civil / Structural

Technip Energies · Cameron

At Technip Energies, we are more than just a leading engineering and technology company; we are pioneers committed to shaping a sustainable future. With over 65 years of experience and 15,000+ talented professionals worldwide, we deliver innovative solutions to real-world energy challenges. We believe in the power of collaboration, diversity, and an inclusive culture where your well-being is a top priority.

Join us on a one-of-a-kind journey where you can take pride in Being Part of the Solution for the benefit of our planet, people, and communities. If you share our determination to drive the transition to a low-carbon future, then this could be the job for you.

We are currently seeking a Site Civil Structural QC Inspector for the Marine Offloading Facility (MOF) to join our project team based in Cameron Parish, LA.

About the Project

Commonwealth LNG project is a new liquefaction and export facility in construction phase at a site located at the mouth of the Calcasieu River on the Gulf of America in Cameron Parish, Louisiana, USA consisting of 393 acres. The nominal net in tank capacity of each train facility is 1.55 million metric tons per annum (MTA), 9.3 MTA net in tank capacity for a 6-train facility.

The Project shall include, among other, the following systems / areas:

Inlet facilities
Power Island
6 LNG trains, each consisting of:
- Pre-Treatment Facilities including Mercury Removal, Acid Gas Removal (using BASF license), Dehydration and Heavy Hydrocarbon Removal (using UOP license);
- Liquefaction (using HONEYWELL technology) and Refrigeration.
OSBL Interconnecting pipe racks;
Boil-Off Gas compressors and associated pipe racks;
OSBL Equipment and associated pipe racks;
Flares (Elevated and Marine)
LNG Tanks (5 ea – 50,000 m3)
Power & Control Systems
Marine Facility and LNG Loading Arms
Civil, Structural and Heavy Haul Road
Administration, control, and warehouse facilities
Storm Surge Wall

About the opportunity we offer:

The CWLNG Site Quality Inspector (Civil - Structural) is responsible for performing in-process and final inspections, field testing oversight, and quality-record maintenance across construction activities to verify that project quality standards, specifications, Inspection and Test Plans (ITPs), and required process controls are consistently achieved throughout the field build process.

This is a site-based position requiring extended stays away from home. Working closely with Construction, subcontractors, third-party testing agencies, the Site Quality Manager (SQM), and the owner/client as applicable, the Quality Inspector supports civil and structural quality activities while also providing inspection support across welding, piping, and mechanical scopes. The position promotes a strong quality culture, identifies and controls nonconformances, supports corrective actions, and helps ensure complete and accurate turnover documentation through project completion.

Key Responsibilities

Functional Responsibilities

Conduct inspections relevant to civil, structural, welding, piping, and mechanical scopes of work including mandatory testing required by project specifications and applicable standards.
Perform in-process inspections of civil works, including inspection and issuance of concrete pour cards.
Maintain the site concrete break log and ensure it is supported by third-party field reports from the testing agency.
Inspect structural steel erection, structural components, miscellaneous supports installation, and associated testing activities.
Coordinate third-party welding nondestructive examination (NDE), including daily inspection and testing activities.
Maintain the site weld log in both hard-copy and electronic formats and support welder qualification activities.
Assist the Site Quality Manager with selection of welding procedures, welder certification, weld inspection, material and weld tracking, turnover documentation, and MT and PT NDE testing.
Monitor associated discipline work and prepare and issue required quality reports and forms; review inspection and test records for completeness and accuracy.
Use measurement and calibrated tooling as required to perform inspection activities and verify conformance.
Coordinate quality activities with area and discipline supervisors and with the owner/client when applicable.

Quality / Compliance Responsibilities

Proactively enforce applicable Inspection and Test Plans (ITPs), project specifications, engineering documentation, and quality requirements.
Monitor subcontractor compliance with ITPs and project specifications and verify that quality records and turnover documentation remain current.
Identify, document, and control Non-Conformance Reports (NCRs) related to the civil scope of the project; issue NCRs for identified deficiencies and support timely closeout.
Follow up on inspection remediation, changes, and rework associated with NCRs across the disciplines involved.
Assist the Site Quality Manager in administering the Project Quality Control Plan and Company Quality Manual.
Assist the Site Quality Manager with corrective actions as needed and verify implementation through inspection and documentation review.
Ensure adherence to applicable code requirements and verify that associated documentation and quality records are completed correctly and maintained.
Verify through inspection that work is performed in accordance with approved procedures, and that required documentation is completed thoroughly and maintained in accordance with company policy.

Documentation / Turnover Responsibilities

Ensure timely completion of inspection paperwork, quality records, and turnover documentation and assist with project completion activities.
Maintain both hard-copy and electronic inspection sheets and test data generated during the construction build effort.
Maintain turnover books on site and support periodic audits to confirm documentation is complete, current, and traceable.
Review records and supporting documentation for accuracy and completeness before inclusion in turnover packages.
Support material, weld, concrete, inspection, testing, NCR, and corrective-action traceability as required by the project quality program.

Qualifications

Knowledge of welding inspection activities, welder qualifications, weld tracking, and coordination of NDE activities.
Proficiency in the use of measurement and calibrated inspection tooling.
Ability to identify quality deficiencies, document nonconformances, and follow remediation and corrective-action activities through closeout
Ability to communicate clearly and concisely, both orally and in writing, with Construction, subcontractors, third-party agencies, quality personnel, and owner/client representatives.
Ability to work effectively under pressure in a fast-paced construction environment.
Technical competence and general understanding of software, hardware, networks, and related tools as required to support electronic quality records and project activities.

We love to hear from you and how you match with this position. To be successful in this mission you should meet the following requirements:

At least 10 years construction quality field experience on large mega EPC projects in the United States with verifiable field work experience.
Ability to satisfactorily complete pre-employment screenings
Ability to travel and work at the project site for extended period of time away from home
Ability to read and interpret civil and structural drawings.
Ability to independently perform routine Inspection and Test Plan activities without supervision.
Working knowledge of civil and structural construction inspection practices, including concrete placement, concrete testing records, structural steel erection, and miscellaneous supports.
Strong documentation skills with the ability to maintain accurate hard-copy and electronic quality records in MS Excel or other inhouse databases.
Communicate effectively and proficient in English with experience working in a multicultural diverse construction work environment.

What’s next?

Once receiving your application, our Talent Acquisition professionals will screen and match your profile against the role requirements. We ask for your patience as the team completes the volume of applications with reasonable timeframe. Check your application progress periodically via personal account from created candidate profile during your application.

We invite you to get to know more about our company by visiting and follow us on LinkedIn, Instagram, Facebook, X and YouTube for company updates.

#LI-MJ1

This is a fixed-term contract position expected to last through January 2028 for the Commonwealth LNG project. The construction site Civil/Structural Marine QC Inspector responsible for multidiscipline performing in-process and final inspections, field testing oversight, and quality-record maintenance across construction activities to verify that project quality standards, specifications, Inspection and Test Plans (ITPs), and required process controls are consistently achieved throughout the field build process.

More jobs at Technip Energies · Engineering & Construction jobs in Cameron, LA