Rigger Certified
Zachry Group · Port Arthur
Position Summary
Riggers will be responsible for the lifting and movement of heavy equipment and materials. They will inspect all applicable rigging. Plan for lifts using weight of the load, lifting capacity of equipment, and other relative information needed to safely plan any heavy load movement. Attach load using slings, chains, cables, hooks, shackles, and other related equipment. They will be responsible for signaling operator during lift with instructions.
Qualification Highlights
Must have 4+ years’ experience as a Journeyman Rigger
Must possess all Knowledge Skills and Abilities for positions (see below).
Must have or be able to successfully complete the NCCO/NCCER Rigging assessment.
Must be able to meet all physical requirements.
Must be able to work at heights in excess of 300 ft.
Must have all required tools.
Must have reliable transportation.
Position Responsibilities
Act as safety observer on equipment lifts.
Inspect all rigging equipment.
Plan or assist in planning of lifts.
Attach loads using slings, chains, shackles, hooks, cables, and other rigging equipment.
Tie rope around load for use of guiding during lifting and positioning.
Signal Equipment operator during lifts for directional or placement instructions.
Guides load during lift and positioning.
Climb structures to guide and position load.
Assist in connecting or stabilizing of load prior to detaching load from equipment.
Detach loads and remove rigging equipment.
Place and remove outrigger pads from Cranes and other heavy equipment.
Required Qualifications
Must have specific knowledge of rigging equipment and their capacities.
Must have knowledge of required tools and their proper use.
Must be a team player and have effective communication skill in dealing with co-workers and any other work related contacts.
Must have basic knowledge of the construction processes involved in heavy industrial construction.
Must be able to use problem solving skills and critical thinking to resolve and identify issues, including safety risks.
Must know proper hand signals to communicate with equipment operator.
Must have knowledge regarding lift planning including but not limited to: the equipment to use, load capacities of equipment and lifting equipment.
Must hold a NCCER certification for Rigging.
Must have basic transportation knowledge in regards to moving equipment and loads from one location to another.
Knowledge of arithmetic required to plan for a lift.
Must be willing to follow all company directives and safety procedures.
Must be able to work at heights.
Must have reliable transportation.
Preferred Additional Qualification
Current Zachry or Zachry ROF’ed employee.
Former experience working with Zachry Industrial, Inc.
Experience working as an Industrial Ironworker.
Reports to Position
This position does not have any direct reports; however the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions.
Physical Requirements
Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting.
Will talk and hear to communicate.
Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools with up to 70 ft-lbs of pressure.
May be required to lift, carry and move up to 50lbs.
Will work at heights, climb ladders and stairways, work off of platforms and man lifts, and may occasionally work out on an open structure using the appropriate fall protection requirements.
Must have good visual acuity and depth perception.
Must be able to work outside in the changing weather conditions including in the heat, cold, rain, snow, and wind.
Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and leather work boots.
Required Tools
Tool box w/ lock
12” Adjustable Wrench
1 1/8” Spud Wrench
Torpedo Magnetic Level
Tool Belt
24” Hand Level
Channel Locks
Bull Pins (2)
Small Wedges (2)
Pair of Leather Gloves
25’+ Tape Measure
1 ¼” Spud Wrench
50’ Tape Measure
Drift Pin
#9 Kleins
4 to 6lb Hammer
Line up Bars (2)
Large Wedges (2)
Rain Coat
Rain Boots
ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.
*POST
JOB REQUIREMENTS
*Post
CERTIFICATIONS AND/OR LICENSES REQUIRED *
NCCCO - Rigger Level I
NCCCO - Rigger Level II
NCCER - Industrial Rigging
OTHER POSITION OR SITE REQUIREMENTS
Job Specific Requirements
DOES THIS POSITION REQUIRE A COMPUTER? *
No
BACKGROUND CHECK *
Yes
REQUIREMENTS MEDICAL *
Drug Screen
Pre-Employment Physical
SAFETY/ORIENTATION/TRAINING *
Safety Council
Site Specific
More jobs at Zachry Group · Skilled Trades & Maintenance jobs in Port Arthur